Digwright had been using Topcon 3D-MC² systems from Position Partners on its dozers since 2009 and had always found the 3D-MC² systems to be more responsive and smoother than other systems on the market, so when the opportunity to implement the Topcon 3D-MCMAX mastless machine control system arose, Digwright jumped at it.
Andrew Wright, Director and Owner of Digwright, said when the opportunity came for them to install a [3D-MCMAX] mastless system on one of their new CAT D6T VPAT machines they were keen to give it a go.
“The rate of speed the machine was able to trim at in higher gears is impressive.”
Why did Digwright choose the Topcon 3D-MCMAX machine control system?
Mr Wright found that the Topcon 3D-MCMAX machine control system from Position Partners took Digwright’s dozer GPS machine control to the next level of performance.
“This system saves our business time, fuel and money through making our dozer more efficient in bulking and trimming to grade applications,” Mr Wright said.
“The system works well in all types of materials especially when densities and compacted material change frequently. It reduces the blade ride on harder surfaces and seamlessly reacts to softer material, where the blade would normally bite in, the Topcon 3D-MCMAX from Position Partners will correct the blade lighting fast to leave a smooth level finish.”
Another benefit that Mr Wright has noted since implementing the 3D-MCMAX machine control system is improved safety due to the system being mastless.
“Removing the mast pole from the blade has also improved safety through better visibility and no need for the operator to stand on the blade to remove the GPS antennas at the start and end of a shift,” Mr Wright said.
The importance of service and support during purchasing and implementation
Product support is an important part of Mr Wright’s decision-making process when researching new technology and equipment to implement: minimising the downtime of Digwright’s machines is critical.
“If it’s not working, it’s not making money,” Mr Wright said. “In the past ten years of dealing with Position Partners, we have found them to be proactive, helpful and responsive to a fix, repair or to come with a solution that will keep us moving.”
The team at Digwright also implemented Position Partners’ Tokara Link, an Australian-designed telematics solution created specifically to improve efficiency and productivity for earthworks and civil construction projects.
Using a modem installed in the machine, Tokara Link connects your machines to the office, provides access to Position Partners’ technical support and links you to any GPS network required for the job.
“Our 3D-MCMAX dozer linked with a T-MESH and Tokara Support allows Position Partners to better support our machine with remote access by their support team to fix any issues or upload files for hundreds of kilometres away. Meaning no need to wait for a technician to come to site in most cases,” Mr Wright said.
”Overall, we are extremely happy with the 3D-MCMAX and the install of the system by Position Partners. It looks just like a factory integrated system and not a tacky bolted on after market system.
“If you are looking to get more efficiency out of your dozer, and save time and money on your next project, I can thoroughly recommend a Topcon 3D-MCMAX system,” Mr Wright said.
This partner content is brought to you by Position Partners. For more information, visit positionpartners.com.au.