Bruce Highway

A contract has been awarded for the construction of Smart Motorways technology on the Bruce Highway between the Pine River and Caloundra Road.

Seymour Whyte Constructions will begin implementing the technology, which includes ramp signals, variable speed limit and message signs, vehicle detection systems and CCTV cameras, to proactively monitor and respond to changing road conditions such as crashes, wet weather or heavy traffic conditions in real time.

The $105 million Bruce Highway Pine River to Caloundra Road Smart Motorways Stage 2 project is jointly funded by the Federal and Queensland Governments on an 80:20 split, with the Federal Government contributing $84 million and the Queensland Government contributing $21 million.

Deputy Prime Minister and Minister for Infrastructure, Transport and Regional Development, Barnaby Joyce, said the project is part of the 15-year, $13 billion Bruce Highway Upgrade Program.

“As part of our commitment to improving the safety and performance of our national highways, the Australian Government is allocating $84 million towards installing this additional Smart Motorways technology along the Bruce Highway,” Mr Joyce said.

“Through our investment, motorists can expect to see improvements in safety, efficiency and reliability along this busy stretch.”

Queensland Transport and Main Roads Minister, Mark Bailey, said the technology proved to be an effective safety device across the state.

“Smart Motorways technology gives drivers advance warning of congestion ahead and allows for speed limits and ramp signals to be changed remotely,” Mr Bailey said.

“This project builds on the network of Smart Motorways technology already delivered on the Bruce Highway southbound between the Pine River and Uhlmann Road as part of the Smart Motorways Stage 1 project in 2015.

“Not only are we improving safety for drivers on Queensland’s busiest highway, but we’re creating about 140 direct jobs at a time when they are needed most.”

Member for Bancroft, Chris Whiting, said wireless traffic sensors would be installed at priority locations along the 60km stretch to monitor vehicle travel times, traffic flow and speed.

“When installed, these traffic sensors will provide the coverage and resolution necessary to accurately monitor the highway’s performance in real time,” Mr Bancroft said.

“This technology will improve safety, reduce stop-start travel and importantly, provide more predictable travel times for motorists.”

Member for Kurwongbah, Shane King, said Seymour Whyte Constructions was planning the construction program, with work to begin in early 2022.

“Due to the high volumes of highway traffic, the majority of work will be undertaken at night to minimise disruptions to motorists,” Mr King said.

“Traffic controllers, reduced speed limits and signs will be in place to ensure the safety of road workers and motorists.”

Member for Pumicestone, Ali King, thanked the community for their patience during construction.

“I encourage locals to drive to the conditions during construction, which is expected to be completed in 2024,” Ms King said.

Work is expected to be completed in 2024, weather and construction conditions permitting.

For more information, visit https://www.tmr.qld.gov.au/projects/bruce-highway-pine-river-to-caloundra-road-smart-motorways-stage-2.

 

Related articles
0 Comments

Leave a reply

Your email address will not be published. Required fields are marked *

*

©2022 Infrastructure Magazine. All rights reserved

CONTACT US

We're not around right now. But you can send us an email and we'll get back to you, asap.

Sending

Log in with your credentials

Forgot your details?